LHP-6
CTPPLATE
넳
넲
Thermal CTP plate （Single layer)
| PRODUCT SPECIFICATION |
| Model |
|
LHP-6 (Single layer) |
| Characteristics |
|
High resolution ; High sensitivity ; Long run length ; Wide latitude; |
| |
Strong developer compatibility ; Outstanding platesetters compatibility |
| Substrate |
|
Electro-chemically grained and anodized lithographic aluminum. |
| Gauges |
|
0.15-0.40(mm) |
| Maximum Width |
|
1400mm |
| Spectral Sensitivity |
|
830nm |
| Exposure Energy |
|
120-130mJ/cm2 |
| Resolution |
|
1-99% @ 200lpi |
| FM Capability |
|
20um stochastic |
| Plate Setter |
|
Any suitable CTP setters for positive thermal CTP plates |
| Developer |
|
Recommended to use Longway or Kodak's Goldstar Premium Developer |
| Process |
|
Developing Temperature: 23℃--25℃ with ourselves or Kodak's Goldstar Premium |
| Developer. Developing time: 25-30seconds . Developer replenishment: 120ml/sq.m |
| for dynamic supplement and 60ml per hour for static supplement |
| Plate Finisher |
|
Recommended to use 140G plate finisher |
| Packaging |
|
0.15mm ---100 pieces/box |
| |
0.25/0.30mm ---50 pieces/box if length <1030mm |
| |
30 pieces/box if length ≥1030mm |
| |
25 pieces/box if the area of each plate > 1 m2 |
| Run-length |
|
60,000~100,000 unbaked, 100,000~200,000 post-baked |
| Actual vary according to press, ink and paper conditions |
| Safelight |
|
Daylight handling |
| Shelf life |
|
18months under recommended storage conditions |
| Transport and Storage |
|
Store plates flat at normal temperature with relative humidity between 40% and 70% |
