Double layers CTP Plate

Double layers CTP Plate

现价:¥0.00

添加时间:2018-04-20 10:00:00

ModelLHP-UV
ApplicationCommercial & Newspaper , UV print application
SubstrateElectro-chemically grained and anodized lithographic aluminum.
Gauges0.15-0.40(mm)
Maximum Width1380mm
CoatingTwo layers system, positive acting
Spectral Sensitivity830nm
Exposure Energy100-120mJ/cm2
Resolution1-99% @ 250lpi
FM Capability20um stochastic
Plate SetterAll the main brands for positive thermal CTP plates.Such as Kodak Trendsetter
/Lotem/Magnus ; Fuji Javelin T9000HS, Heidelberg Topsetter/Suprasetter; 
Luscher Xpose Platesetter etc
DeveloperCan work with almost all brands of developers in the market.
ProcessDeveloping Temperature: 24±1      Developing time:   15-30seconds.  
Developer rate:100-110ml/sq.m, depending on use
Plate FinisherRecommended to use 140G plate finisher

UV ink compatibility

Applicable with UV inks
Finisher rate30ml/sq.m 
Packaging0.15mm ---100 pieces/box
0.25/0.30mm ---50 pieces/box if length <1030mm
30 pieces/box if length 1030mm
25 pieces/box if the area of each plate > 1 m2
Run-lengthUnbaked: UV ink 50,000    normal ink 100,000     Baked:+180,000
Actual run length vary according to press, ink and paper conditions
SafelightDaylight handling
Shelf life18months under recommended storage conditions

Transport & Storage 

Store unopened plates flat in the original pack in a cool and dry environment, 

Away from excessive cold,heat and humid.

To be recommended relative humidity 30~70% and 5~30℃


上一个:Thermal CTP plate LHP-6